Pedrollo 4SR2/7 hydraulic part

Pedrollo 4SR2/7 hydraulic part:

The Pedrollo 4SR2/7 is a 4'' (Ø 98mm) hydraulic well pump part, fully executed in stainless steel AISI 304 and technopolymer impellers. The Pedrollo 4SR2/7 hydraulic part is suitable for 4'' Pedrollo or Franklin electric motors of 0.5 HP.

The 4SR2/7 is equipped with a floating axial multi impeller system and can pump up to 150 grams of sand per m3 (medium). Maximum medium temperature 30 °C.

This hydraulic part has a 1¼'' pressure connection and a maximum pump capacity of 3,600 ltr/hour and a maximum head of 4.4 Bar.

Pump curve Pedrollo 4SR2/7:
Capacity (Ltrs/min) - head (Bar)

20 L/min. - 4.4 bar
40 L/min. - 3.3 bar
60 Ltr/min. - 1.4 bar


The 4SR2/7 has a 1¼'' pressure connection, for a good connection – for a transition to a Tyleen hose, we recommend mounting the Beulco coupling with 1¼'' male thread in the pressure connection of the pump part.

If you use tyleen / PE 100 pipe, we advise you to use the separate Beulco conical bush in combination with the Beulco coupling, so you are assured of an optimal transition to your PE pipe.

The 4SR2/7 requires an engine power of 0.5 HP / 0.37KW. in a 230v. or 400v. performance.

For matching motors see Pedrollo or Franklin 4'' electric motors (see below under related products).

Product specifications Pedrollo 4SR2/7:

Pump type: Pedrollo 4SR2/7
Power requirement: 0.5 HP – 0.37 KW
Capacity in litres/minute: 60 Ltr.
Pressure in bar: 4.4 bar
Press connection: 1¼'' female thread

Material: Completely made of stainless steel AISI 304
Impeller material: Technopolymer
Maximum medium temperature: 30 °C
Maximum sand to be pumped: 150 grams / m3 (medium)